How to Reset the HVAC System

If you live in Melbourne, chances are that your home’s HVAC system has saved you on more than one occasion. Whether it’s during a scorching summer or a freezing winter, your HVAC system is an essential part of keeping your home comfortable and livable.

But sometimes, things don’t always go as planned and you might find yourself struggling to reset the system or having issues troubleshooting it. Well, fear not! At DGB Refrigeration Heating & Cooling we’ve been in the business for over 15 years and we know how to handle these issues quickly and professionally. In this article, we’ll show you how to reset your HVAC system so you can get back to being comfortable in no time!

Disconnect the Power and Check the Connections

If you’re having issues with your HVAC system, resetting it could solve the problem. Here are five steps you can take to reset your HVAC system quickly and easily.

First, you will need to disconnect the power to the system. This is a simple but important step: it ensures no one gets electrocuted while working on the system or risks damage from a sudden surge of power.

Once the power is off, you’ll have to check all of your connections. If any of them are loose or damaged, tighten them up or replace them accordingly. This will ensure the electricity flows smoothly and that all components are working together properly for optimal performance.

Try Resetting the System via the Thermostat

One of the simplest but often most effective solutions for many HVAC issues is resetting the system via the thermostat. As easy as it sounds, it could really save you time and money in getting your HVAC system up and running again.

If you’re having problems with your heating or cooling system, there are a few simple steps you should take. The first one is to try resetting the system via the thermostat. All you need to do is:

1. Turn off the power from the main circuit breaker, wait for 30 seconds, and then turn it back on.
2. Set your thermostat to “Heat” or “Cool” depending on what you want your HVAC system to do, and set it a few degrees above or below your desired setting so that it kicks in automatically when you switch it back on.
3. Make sure all fan speed settings are on “Auto” instead of either “On” or “Off” mode so that the fan runs automatically when needed.
4. Press and hold down both the “Reset” button and “Test” button until all LED lights start flashing at once then release both buttons simultaneously after 5 seconds to reset your HVAC system completely.
5. Wait for 5 minutes until all LED lights stop flashing and then turn your power back on at the main circuit breaker again to turn your HVAC system back on (if necessary).

By following these five steps, you can easily reset your HVAC system quickly and have peace of mind knowing that everything will be running smoothly once again.

Check Circuit Breakers and Fuses

Checking the circuit switches and fuses is the third stage in resetting your HVAC system. In the event of a power surge or failure, the breaker box is equipped with a number of switches that are intended to shut off electricity to designated locations. Before trying to restart the system, it is crucial to examine these switches.

If you notice a switch that is off, turn it on and wait for 30 seconds to see if a restart happens. If not, keep going with the instructions listed here. Additionally, ensure that none of the fuses has been harmed by improper handling or electrical surges and that they are all in good functioning order. Before completing the reset procedure, make sure to test each switch separately.

Clear Out the Air Filter

Now that you’ve made sure the power is off, it’s time to check and clean the air filters. This can be done without any tools and will ensure your HVAC system starts running smoothly.

At DGB Refrigeration Heating & Cooling, we recommend cleaning or replacing your air filters after regular intervals. Depending on the type of system you have and where you live, this can typically be done every six months to a year. To make sure your HVAC system runs efficiently throughout the year, switch out your old air filter with a fresh one whenever necessary.

Cleaning or replacing an air filter is straightforward and easy to do:

1. Start by identifying where your air filter is located—it should be marked in your owner’s manual or on the unit itself. Unscrew any filters you find in place.
2. Remove the old air filter and inspect it for any dust or dirt buildup. Replace it with a new one right away if it appears to be too dirty.
3. Put in the new air filter and replace any screws that may have been holding it in place before. Make sure everything is securely fastened so you don’t have to worry about it coming loose!
4. Finally, turn on the power to your HVAC system and check that everything works correctly once more before calling it quits for good!

Have a Professional Inspect the System

You don’t always need to contact a professional right away if your HVAC system breaks down. You can simply reset your HVAC system and get it back up and running by following the above-mentioned procedures. It’s crucial to proceed cautiously and pay close attention to the directions.

It’s time to contact an expert if, after trying these steps and adjusting, you still aren’t successful. Residents of Melbourne can get HVAC services from DGB Refrigeration Heating & Cooling, and our skilled techs can swiftly and efficiently fix and reset your HVAC system. Don’t be afraid to get in touch with us if your HVAC system isn’t functioning correctly.

Whether you require assistance with troubleshooting, resetting, or adding a new device, our team of experts can offer the support you require. No matter what kind of heating and cooling system you have in your house, our team can rapidly restore it to peak performance because we are experienced with all kinds of HVAC systems.

To get the help you require with any Heating problems you may be experiencing, call us right away at 03 7038 6918. We look forward to speaking with you.